Posts Tagged ‘soldering iron’

How to Make Stained Glass

DSC06201-1

The practice of making stained glass has been around for quite a long time. Stained glass windows and churches seem to go hand-in-hand, and you will find some of the earliest samples of stained glass artwork in churches on the European continent. Nowadays, stained glass is not confined to only churches and other such religious places; you can also see stained glass art in homes, offices, hotels, restaurants, hospitals and so on. We now have stained glass installed in windows, doors, ceilings, room-dividers, mirrors, lampshades, sun-catchers, gift boxes and many other items. Used properly, stained glass artifacts can transform the look of a place from commonplace to something quite extraordinary.

If, like me, you love stained glass objects, you could have a go at making them yourself. The craft of stained glass is not difficult to learn, as long as you follow the instructions, take all proper precautions and put in enough practice.

Tools Required

Once you’ve decided you are going to take up stained glass making, you might as well buy the best tools in the market. They may be a tad expensive, but will give you good value for your money in the long run. Here are some of the tools you will need:
Glass Cutter – get a self-lubricating one with a tungsten Read more »

The Secret to Perfect Solder Lines

Stained Glass Soldering

Solder is used to hold the various pieces of stained glass together in a stained glass panel. To achieve a professional quality, solder lines need to be smooth and uniform. This can be achieved by following basic steps and using quality tools and supplies.

The tools and supplies needed for soldering include a soldering iron, solder and flux. The soldering iron should have a ceramic heating element with either a built in temperature controller or plugged into a separate temperature controller unit. The solder used needs to be a 60/40 mixture of alloys for the majority of your soldering. For decorative soldering, an alloy mixture of 60/37 solder is recommended. An odorless non-smoking liquid flux is the preferred flux.

Basic Steps for Soldering

    1. Heat the soldering iron to 68 on the temperature controller
    2. Use an abrasive pad or wet sponge to clean the iron’s tip before you begin and periodically as you work
    3. Lightly apply flux to a section of the stained glass project you are working on
    4. Using 60/40 solder, unroll it to a manageable length, and then lightly touch the area to be worked on
    5. Place the solder on the tip of your iron and move both the iron and the solder at a slow constant rate following the fluxed copper foil seams
    6. When you need to end or stop, do not just move the iron vertically off, but rather slide the iron towards the glass
    7. Don’t solder out to the perimeter of your stained glass piece, leave approximately ½ inch along the edge. This will allow the zinc came to fit over your glass

Read more »